Question:
Security Tool Virus Help?
anonymous
2009-11-05 12:13:40 UTC
I got the virus that calls it self Security tool. Its been giving my life hell and i need some help. Everytime i try to turn on my computer, a blue screen of death occurs after the Windows logo shows up. I need some serious help. I've tried to boot into safe mode, but another blue screen stops me there.
Six answers:
Charles
2009-11-05 15:05:57 UTC
This Step :



You may receive the following Stop error message in Windows XP:

STOP: 0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151)

"MACHINE_CHECK_EXCEPTION"

The four parameters inside the parentheses may vary.



CAUSE

This behavior occurs because your computer processor detected and reported an unrecoverable hardware error to Windows XP. To do this, the processor used the Machine Check Exception (MCE) feature of Pentium processors or the Machine Check Architecture (MCA) feature of some Pentium Pro processors. The following factors may cause this error message:

System bus errors

Memory errors that may include parity or Error Correction Code (ECC) problems

Cache errors in the processor or hardware

Translation Lookaside Buffers (TLB) errors in the processor

Other CPU-vendor specific detected hardware problems

Vendor-specific detected hardware problems



RESOLUTION

Use the Windows Error Reporting tool

When this error occurs, use the Windows Error Reporting tool. With this tool, you can send the error report directly to Microsoft, and then the tool will report back if a fix or a workaround is available. To use this tool, follow these steps:

Click Send Error Report when you are prompted to send the error report to Microsoft.

If a fix or a workaround is available, click More Information after you send the error report to Microsoft. This helps you obtain the fix or information about how to work around the issue.

If a fix or a workaround is not available, you can contact Microsoft support try to help resolve this issue. For information about how to contact Microsoft support, visit the following Microsoft Web site:

http://support.microsoft.com/contactus/

Contact your hardware manufacturer

Your best bet may be to contact your hardware manufacturer or a computer hardware technician for help with troubleshooting this issue. The manufacturer may have some additional steps to try to diagnose this problem. The manufacturer will be able to determine whether the hardware has to be repaired or replaced.



MORE INFORMATION

A machine check exception occurs when Windows XP and your hardware platform cannot recover from a hardware error so that the system can continue to run successfully and reliably. More specific diagnosis of machine check exceptions is difficult, and there is no general solution. Contact your hardware manufacturer or a computer hardware technician for help with troubleshooting this issue.



Machine check exceptions are frequently caused by one of the following conditions:

You are running the processor or mainboard beyond its specifications. For example, you are overclocking the processor or bus. We recommend that you run your hardware at the manufacturer-rated speeds.

Noisy power, overstressed power strips, outmatched power supplies and failing power supplies can destabilize your computer. Make sure that you have a stable, reliable power supply to your computer.

Extreme thermal conditions caused by the failure of cooling devices such as fans may damage your computer. Make sure that your cooling devices are all working.

You have damaged memory or memory that is not the correct type for your computer. If you recently changed the memory configuration, revert to the previous configuration to determine what is wrong. Make sure that you are using the correct memory for your computer.

Note Your hardware may support additional error logging features that capture the machine check exception and suggest a more specific solution.



The Pentium and Pentium Pro processors provide a mechanism to detect and to report hardware-related problems such as memory parity errors and cache errors. To signal a hardware error, the processor signals the detection of a machine check error by generating a machine check exception (Interrupt 18). Windows XP reports that the error occurred and displays parameters that you can use to decode the exception. Contact your hardware vendor or processor manufacturer for information about the Machine Check Architecture, or see the Intel Pentium Pro Family Developer's Manual - Volume 3: Operating System Writer's Manual.
Montel Paige
2009-11-05 12:32:22 UTC
If you can not boot up or get to safe mode, then you are going to have to reboot the WHOLE computer or see if you have a startup disk that will let you get to safe mode and turn off your system restore and then run you antivirus and spyware programming from there,
anonymous
2016-10-15 14:42:40 UTC
this would not inevitably eliminate risk-free practices device, inspite of the incontrovertible fact that this is a few thing that could help pass in direction of that. comparable factor is going for finished risk-free practices. check in the product utilising a random mastercard huge form. this methodology is desperate up so as this is recognizes a undeniable length or sequence of numbers as a valid mastercard huge form. case in point, you should commence with your mastercard huge form's first 8 digits, after which randomly enter something till you get a green verify mark instead of a purple X. Then bullshit something of your information. this might a minimum of get you your computing device back and you would be waiting to run activity supervisor.
anonymous
2009-11-05 15:08:29 UTC
If you can boot up your system normally, then try with this video tutorial on how to remove this stuff.

http://www.net-studio.org/eng/patch/patch/100-patch-pour-supprimer-le-virus-security-tool.html



The link to the video is near the download button.



You can also find a removal tool for this malware on that page.
Shaun
2009-11-05 12:34:39 UTC
You may need to use some boot time antivirus software.

http://www.raymond.cc/blog/archives/2009/08/31/integrate-multiple-antivirus-rescue-disk-into-one-single-disc-or-usb-flash-drive-with-sardu/

From another computer, download the bootable antivirus software from the web site above.

Follow the instructions on that website.
anonymous
2009-11-05 12:22:35 UTC
OK!!!!! LISTEN MATE

1.when cp is starting tap f8 fast, then click repair computer

2.then type in user and pass

3.then click restore to factory state

4. This will delete EVERYTHING

5. then it will restore then everything will be fresh and new!

6. then you will be un-stressed


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...